I-Test & I-Test Manager
I-Test is Crowcon’s fully automated solution for testing and verifying that your Gas-Pro and T4 are in a compliant state to carry out your daily work. Bump testing standards are getting tighter in all regions and the need for controlled bump and calibration records is a must. I-Test and the accompanying I-Test manager software makes this as easy as can be. It takes less than 1 minute to complete a bump test!
- Description
Product Description
When the Gas-Pro or T4 are inserted inserted into I-Test, no button presses are required and I-Test starts testing automatically. A bump test takes less than 1 minute. The test carries out verification that the sensors are responding to a known value of gas, and filters are clear and good for use. It will also ensure the audible and visual alarms are working, giving the user full confidence that they are compliant for site use.
I-Test is easy to use with no requirements to turn on and off the gas: the design of the demand flow regulator coupled with the I-Test will allow the automatic pull of the correct required amount and concentration of gas. I-Test can also recognise cylinders that are empty or those that have expired allowing full compliance.
I-Test stores all bump and calibration results and this can then be interrogated using the I-Test Manager software. This powerful software allows you to carry out exception reporting to see who has and hasn’t carried out their bump or calibrations. I-Test Manager also makes it very easy to print both bump and calibration certificates and any tailored reports you have generated.
I-TEST HAS BEEN UPDATED WITH NEW FEATURES
- Stand alone calibration allows you to calibrate all sensors in the Gas-Pro and T4, even if the sensors are not due a calibration.
- I-Test now supports all Gas-Pro flammable sensor configurations, including methane, propane, butane, pentane and hydrogen. Bump testing and calibration can be performed with the target gas, or using methane. So if you have fleet of methane, butane and pentane Gas-Pro, I-Test can bump test them all using methane
- I-Test automatically updates the date and time in your Gas-Pro and T4. When the clocks change for daylight savings, I-Test will update Gas-Pro and T4 as soon as it sees them.
Flexible
- Mains powered, or battery back-up – Use I-Test on site, or in the field
- Entirely self-contained – No extra computers or equipment required
- Ability to update Gas-Pro and T4 configurations – For example, update the bump test interval or alarm levels of your fleet with ease
- Data management – Gas-Pro and T4 store the gas levels they experience. Archive this data long term using I-Test.
- Powerful support software – Makes configuring I-Test extremely easy.
Reliable
- I-Test recognises empty or expired cylinders – Avoid using non-compliant bump/calibration gas
- Testing starts automatically when Gas-Pro or T4 are inserted. Minimal user training required
- Battery backup – Testing continues even if the power is out
Records
- Everything is logged – See everything that‘s been tested and whether it passed/failed
- Exception reporting – Precise reports flag up who has and hasn’t carried out their bump test or calibrations
- Powerful reporting – Need to see which detectors have gone into alarm in the last month? I-Test Manager makes easy work of pulling this summary together
Related Products
-
Read MoreQuick ViewToxic Transmitters – Freedom 5000
By combining advanced sensor technology with common electronics and a common user interface accross all configuration, Freedom 5000 helps users streamline the transmitter’s operation and maintenance requirements for its points of toxic gas detection.With a two wire design and intrinically safe housing the product is easy to install and suitable for general industrial applications. The unique electrical design of the 5000 transmitter and sensor virtually eliminate false alarms due to RFI/EMI sources.
-
Read MoreQuick ViewXgardIQ
The new XgardIQ, our most intelligent fixed-point gas detector, increases safety by minimising the time operators must spend hazardous areas.
This versatile transmitter and gas detector has a range of features that protect engineers and support facilities managers of oil, gas, chemical & petrochemical plants to name a few.
Available fitted with a variety of flammable, toxic or oxygen gas sensors
-
Read MoreQuick ViewGasflag
Gasflag is a control system for monitoring any 4-20mA flammable, toxic or oxygen gas detector. Gasflag is ideally suited to light industrial or commercial applications such as LPG monitoring on garage forecourts, chlorine detection in swimming pool dosing rooms, or methane detection in boiler rooms.
Gasflag features a loud sounder, bright LED indicators and relays for switching external devices such as audible visual alarms or valves.
-
Read MoreQuick ViewVortex
Vortex is our most flexible control package that can be customised to meet your site requirements, however complex, without the need for extensive cabling.
-
Read MoreQuick ViewT4
Portable multigas detector provides effective protection against 4 common gas hazards: carbon monoxide, hydrogen sulphide, flammable gases and oxygen depletion.
Now with improved detection of pentane, hexane and other long chain hydrocarbons.
Offering you compliance, robustness and low cost of ownership in a simple to use solution. T4 contains a wide range of powerful features to make everyday use easier and safer.
-
Read MoreQuick ViewOpen Path Gas Detectors
Crowcon offers open-path infra-red (IR) gas detection systems based on well-proven technology for fast detection of combustible gases and vapours over a line-of-sight up to 200m long.
-
Read MoreQuick ViewToxic Transmitters – 4600 Series
The 4600 Series is a toxic gas and oxygen transmitter designed for single and multi-point monitoring applications where ruggedness, flexibility, and ease of maintenance are critical.
-
Read MoreQuick ViewCrowcon Clip
Reliable and durable fixed life monitoring in a compact and maintenance-free package, the Crowcon Clip has a 2-year life and is available for hydrogen sulphide (H2S), carbon monoxide (CO) or oxygen (O2).
-
Read MoreQuick ViewFlame Detectors
Crowcon offers a range of infra-red (IR) and ultra-violet (UV) based flame detectors for quickly detecting flames at a distance. Depending on model, this includes a variety of gas and fuel fires including those generated from hydrocarbons, hydrogen, metals, inorganic and hydroxyl sources.
-
Read MoreQuick ViewGasmaster
Crowcon’s NEW and ENHANCED Gasmaster Control Panel has a modular design meaning users only need purchase the required number of input modules. It can easily be extended by adding more modules at a later date.
