Open Path Gas Detectors
Crowcon offers open-path infra-red (IR) gas detection systems based on well-proven technology for fast detection of combustible gases and vapours over a line-of-sight up to 200m long.
- Description
Product Description
Using superior “Xenon Flash” technology the SafEye range is immune to false alarms caused by partial blockage and extreme weather conditions (fog, rain or snow) and direct or reflected sunlight, flame or other black body radiation sources.
SafEye Quasar 900
The New SafEye Quasar 900 is an open path detection system. It employs “spectral fingerprint” analysis of the atmosphere using the Differential Optical Absorption Spectroscopy (DOAS) technique. With a range from 7m up to 200m the Quasar 900 detects gas hazards in extremely harsh environments where dust, fog, rain, snow or vibration can cause a high reduction of signal.
- The main stainless steel enclosure is Exd flameproof with an integral, segregated, Exe terminal section.
- An I.S. communicator can be connected for diagnostic/maintenance purposes.
- Includes heated windows to eliminate condensation and icing
- HART capability for digital communication
- Designed to meet SIL2 per IEC61508 and FM performance approved per FM6325 and tested per EN60079-29-4.
SafEye 700 series
The 700 series includes heated optics to withstand severe environmental conditions such as icing, snow and condensation and has a data port to allow easy access for maintenance or configuration changes. Fully functional with up to 90% of signal obscuration eg in heavy fog, its special optics design has a misalignment tolerance of ±1° in all directions. Optional hand held communicator kit which provides easy and economical SafEye maintenance.
SafEye 200 series
The 200 series offers an economical solution for those wishing to incorporate open-path technology into their safety system. Proven on hundreds of installations, it offers an economical solution for those wishing to incorporate open-path technology into their safety system. High immunity to false alarms and rugged design means high availability and reliability.
Duct Mounted SafEye Flammable Gas Detectors
Specially designed Duct Open Path Detectors designed and widely used to monitor ingress of hazardous flammable gas concentrations into air intakes of turbine engines and HVAC air ducts.
Related Products
-
Read MoreQuick ViewToxic Transmitters – Freedom 5000
By combining advanced sensor technology with common electronics and a common user interface accross all configuration, Freedom 5000 helps users streamline the transmitter’s operation and maintenance requirements for its points of toxic gas detection.With a two wire design and intrinically safe housing the product is easy to install and suitable for general industrial applications. The unique electrical design of the 5000 transmitter and sensor virtually eliminate false alarms due to RFI/EMI sources.
-
Read MoreQuick ViewVortex
Vortex is our most flexible control package that can be customised to meet your site requirements, however complex, without the need for extensive cabling.
-
Read MoreQuick ViewXgardIQ
The new XgardIQ, our most intelligent fixed-point gas detector, increases safety by minimising the time operators must spend hazardous areas.
This versatile transmitter and gas detector has a range of features that protect engineers and support facilities managers of oil, gas, chemical & petrochemical plants to name a few.
Available fitted with a variety of flammable, toxic or oxygen gas sensors
-
Read MoreQuick ViewTXgard Plus
TXgard Plus is a flameproof (Ex d), ATEX and UL certified toxic or oxygen gas detector with local LCD display. A choice of sensors are available enabling use in a wide range of applications, including water treatment, oil and gas exploration, chemical plants and steel production.
-
Read MoreQuick ViewT4
Portable multigas detector provides effective protection against 4 common gas hazards: carbon monoxide, hydrogen sulphide, flammable gases and oxygen depletion.
Now with improved detection of pentane, hexane and other long chain hydrocarbons.
Offering you compliance, robustness and low cost of ownership in a simple to use solution. T4 contains a wide range of powerful features to make everyday use easier and safer.
-
Read MoreQuick ViewFlame Detectors
Crowcon offers a range of infra-red (IR) and ultra-violet (UV) based flame detectors for quickly detecting flames at a distance. Depending on model, this includes a variety of gas and fuel fires including those generated from hydrocarbons, hydrogen, metals, inorganic and hydroxyl sources.
-
Read MoreQuick ViewGasmaster
Crowcon’s NEW and ENHANCED Gasmaster Control Panel has a modular design meaning users only need purchase the required number of input modules. It can easily be extended by adding more modules at a later date.
-
Read MoreQuick ViewGasflag
Gasflag is a control system for monitoring any 4-20mA flammable, toxic or oxygen gas detector. Gasflag is ideally suited to light industrial or commercial applications such as LPG monitoring on garage forecourts, chlorine detection in swimming pool dosing rooms, or methane detection in boiler rooms.
Gasflag features a loud sounder, bright LED indicators and relays for switching external devices such as audible visual alarms or valves.
-
Read MoreQuick ViewCrowcon Clip
Reliable and durable fixed life monitoring in a compact and maintenance-free package, the Crowcon Clip has a 2-year life and is available for hydrogen sulphide (H2S), carbon monoxide (CO) or oxygen (O2).
-
Read MoreQuick ViewToxic Transmitters – 4600 Series
The 4600 Series is a toxic gas and oxygen transmitter designed for single and multi-point monitoring applications where ruggedness, flexibility, and ease of maintenance are critical.
